Checking cylinders

Vendors need to ensure that the cylinders they buy comply with certain standards. We list such standards specified by the ISO

ISO 3320:1987	Fluid power systems and components –– Cylinder bores and piston rod diameters –– Metric series
ISO 3321:1975	Fluid power systems and components –– Cylinder bores and piston rod diameters –– Inch series
ISO 3322:1985	Fluid power systems and components –– Cylinders –– Nominal pressures
ISO 4393:1978	Fluid power systems and components –– Cylinders –– Basic series of piston strokes
ISO 4394–1:1980	Fluid power systems and components –– Cylinder barrels–– Part 1: Requirements for steel tubes with especially finished bores
ISO 4395:1978	Fluid power systems and components –– Cylinders –– Piston rod thread dimensions and types
ISO 6020–1:1998	Hydraulic fluid power –– Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series –– Part 1: Medium series
ISO 6020–2:1991	Hydraulic fluid power –– Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series –– Part 2: Compact series
ISO 6020–3:1994	Hydraulic fluid power –– Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series –– Part 3: Compact series with bores from 250 mm to 500 mm
ISO 6022:1981	Hydraulic fluid power –– Single rod cylinders –– Mounting dimensions–– 250 bar (25 000 kPa) series
ISO 6099:2001	Fluid power systems and components –– Cylinders –– Identification code for mounting dimensions and mounting types
ISO 6430:1992	Pneumatic fluid power –– Single rod cylinders, 1 000 kPa (10 bar) series, with integral mountings, bores from 32 mm to 250 mm –– Mounting dimensions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

....CONTD

TO READ FURTHER... SUBSCRIBE TO YOUR COPY TODAY!!!

Print this Page

Email this Page

Post your Opinion

Rate this article